GX Microscopes
Home › Microscopes › Compound

Compound Microscopes

High magnification, transmitted light, thin samples. The classic laboratory microscope, explained for buyers.

What a compound microscope is for

A compound microscope passes light up through a thin specimen on a glass slide, through an objective lens near the sample, and then through an eyepiece. Two lens stages ("compound") multiply magnification, typically from 40× to 1000×. It is the right tool for cells, bacteria, protozoa, pond water, blood and tissue smears, pollen grains, mold spores and fibers.

It is the wrong tool for a whole insect, a seed or anything opaque and thicker than a fraction of a millimeter; for those, see stereo microscopes.

Parts that matter when buying

  • Objectives. Usually 4×, 10×, 40× and sometimes 100× (oil immersion). Achromatic objectives are standard; plan achromats give a flatter field and are worth it if you photograph. The Molecular Expressions Optical Microscopy Primer has a thorough section on objective types.
  • Condenser. Focuses light onto the sample. An Abbe condenser with an iris diaphragm is the minimum for good contrast at 40× and above.
  • Light source. LED is now standard: cool, long-lived, dimmable. Avoid mirrors or non-dimmable halogen on a new purchase.
  • Stage. A mechanical stage with X–Y knobs is a near-necessity above 100×, where nudging a slide by hand moves the image off the field.
  • Head. Monocular is cheapest; binocular is far more comfortable for sessions over ten minutes; trinocular adds a camera port.

Magnification you will actually use

Most home and classroom work happens at 40× and 100×. The 400× setting is for cells and small organisms. The 1000× oil-immersion setting is for bacteria and requires immersion oil, a steady stand and practice. Our article on how much magnification you really need has a table by subject.

Techniques that unlock a compound scope

Good sample preparation and correct illumination matter more than another objective. Learn to close the iris for contrast, set up Köhler illumination if the scope allows it, and make a wet mount properly. Once you can do those three things, almost any decent compound microscope will show you what the expensive ones show.

Who should buy one

Students past middle school, anyone interested in pond life, microbiology, histology or allergens, and people who want to examine mold, pollen and water samples. If your interest is insects, pests or anything you can hold, buy stereo first and add compound later.

Not sure what you are looking at?

Start with the identification guides, or tell us what you found and we will point you to the right reference.

Identification guides